More than just a source of power, the MX Track Series is a comprehensive system of parts tailored for our family of track luminaires. Think flexibility and symmetry; which were the prime considerations when developing this system.
The MX Track Series is the most versatile and comprehensive of track solutions that can be surface mounted, suspended, or recessed. Choose to suspend the track where high ceilings may be present, recess for a slimline appearance or surface mount for a more classic, traditional aesthetic. This track series is available in single circuit for easy installation which can be applied as a surface mounted or suspended variation. For applications which require multiple switching – the MX Track Series is available in three circuit. Each and every part of the MX Track Series has been colour matched to the textured white (RAL9003) and black (RAL9005) of our track lights for absolute cohesion. Combine the MX Track with its compatible accessories to achieve creative lighting solutions, which are only limited to your imagination.
MX (1C) Surface Mounted Track
For a slim, single circuit surface mounted track solution.
MX (3C) Surface Mounted Track
Surface Mount the MX (3C) Track for a more classic, traditional aesthetic
MXR (3C) Recessed Track
For clean lines and a flexible lighting solution; recess the MXR (3C) Track.
What is 3 Circuit? The MX Three Circuit Track integrates three live copper conductors that allow for three lighting circuits to be individually dimmed or switched on and off. When a track light is added, it can be assigned to one of the three circuits via a dial. This granular control of the lighting setup can be improved further by converting it to a single circuit DALI. This allows for ultimate control of individual track lights beyond three circuit.
Accessories available to create:
The simplest track layout is a straight layout. Start your layout with a live end (LIVE) or use a centre feed (CTRF), ensuring you align the grooves and follow the labelled arrows. Please note live end connector’s earth plate is on the left side.
Utilise an L Connector (LCON) to create a 90° bend. For three circuit, our innovative L Connector can be pivoted to suit either left or right side track.
Achieve a T configuration with a T Connector (TCOL/TCOR). By default, the T Connector is set on the outside, however, this can be pivoted to be on the inside
H (or Figure 8) Configuration
A H or Figure 8 layout can be achieved with a combination of two T Connectors.
A simple cross layout is possible with a Cross Connector (CCON). Combine a Cross Connector with other accessories to achieve more complex configurations
Contact us for detailed data sheets and instillation instructions